How To Change Fisher & Paykel Refrigerator Water Filter

Tools & Materials Needed

The tools you need to keep handy while changing a Fisher & Paykel water filter include a new water filter and a water filter tool. 

When To Replace Fisher & Paykel Fridge Water Filter

It is advised to change the water filter cartridge every 6 months. Keep a check on the ‘Replacement Indicator’ icon. Whenever the icon illuminates, it’s time for the old filter to be replaced with a new one. 

Signs You Need To Change Fisher & Paykel Refrigerator Water Filter 

If you start to notice any of the following signs, it is time for you to change the Fisher & Paykel refrigerator water filter:

• The water and ice from your fridge taste bad
• Impurities can be seen in the water from your fridge
• The water pressure in the water dispenser is lower than usual
• Ice-make is not functioning optimally

Where To Purchase Fisher Paykel & Refrigerator Water Filter

The perfect one-stop destination to purchase Fisher & Paykel refrigerator water filters is Glacier Fresh. We provide high-quality replacement filters at affordable pricing with attractive discounts on top of it. In addition, the products have detailed descriptions and customer reviews to help you buy the perfect filter.

How do I remove and replace the water filter in my Fisher and Paykel refrigerator?

The process of removing and replacing the water filter is straightforward. Follow these instructions based on your type of filter.

How To Replace Fisher & Paykel Twist-On Water Filter

To replace a Twist On type Fisher & Paykel water filter, follow these steps:

• Find out the location of the water filter
• Hold the older filter at the base and pull it toward you
• Rotate the filter anti-clockwise and pull it down to remove it
• Take out the new filter from its packaging and place it securely 
• Rotate the new filter into the filter head while pushing it until it gets locked
• Pull once to check if it’s securely placed.

How To Replace Fisher & Paykel Push-In Water Filter

To replace a Push In type Fisher & Paykel water filter, follow these steps:

• Locate and pull down the water filter hatch
• Take out the old filter using the filter tool
• Throw out the old filter and unpack the new one
• Align the new filter in place
• Push the filter while rotating it until it’s locked in place
• Pull lightly to check if the filter is positioned securely.

How Do I Reset My Fisher and Paykel Water Filter Indicator?

Once you are done replacing the filter, you need to reset the Fisher and Paykel water filter indicator. Follow these steps to complete the reset:

• Simultaneously Press the ‘Bell Icon’ and ‘Plus Icon’ for 4 seconds.
• The filter change indicator will automatically turn off once the reset is complete.

Is There Any App For Fisher & Paykel Refrigerator Water Filter?

Yes. Fisher And Paykel Refrigerator Water Filter does have an app. You can connect your appliance to the app using WiFi and check for notifications, updates, status, etc., from the comfort of your device.

Fisher & Paykel Fridge Water Filter Not Working

Regular maintenance and care of your appliance is the best way to ensure a smooth and trouble-free experience. However, these are some of the problems that may cause your filter not to work:

• First use / New Install

The filter may not work when you use it for the first time after installing it. This usually happens because of the air trapped inside the line. Press the dispenser for 2 minutes to push out all the trapped air and initiate the water supply.

• Dispenser Lock Turned On

You won’t be able to draw any water if the dispenser lock is turned on. Long press the dispenser lock button until the light goes off. 

• Frozen Water Tank

A frozen water tank can also lead to your filter not working. To fix this, raise the temperature from the control panel in the fridge and wait for the ice to melt.

• Water supply – Household

If your filter is experiencing reduced water supply, check for the water supply elsewhere in the house. Contact the water supplier if the problem is reduced water supply in your entire area.

• Supply line may be blocked

Check for any leaks or kinks. Then, run about 3-4 liters of water to remove trapped air from the dispenser.

• The filter may be blocked and needs to be replaced

Your filter may be clogged due to debris deposition. The best solution is to replace the old filter with a new one.

• Water supply turned off or not connected

Your filter may not work if your water supply is turned off. The first step is to turn on the water supply. After turning on the supply, run the dispenser until water starts coming out. This may take a while as air usually gets trapped in the line.

Conclusion

Now you must be aware of how crucial it is to change the water filters regularly to ensure safe drinking water for you and your family. Even though you have learned how to change the water filters, it is advised to follow the instructions provided by your manufacturer for that specific model. To find more options for affordable and user-friendly filters, visit our online store.